Cisco AS5350XM Configuration Manual page 49

Verifying Basic Setup
512K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
Table 2
Table 2
Field
AS5400 uptime is....
System returned to ROM by reload at....
System image file is....
Checking the Initial Running Configuration
The Cisco IOS software creates an initial running configuration. Inspect the configuration to get familiar
with the default settings. User input is shown in boldface type.
Router> enable
Password:
Router# show running-config
Building configuration...
Current configuration : 7653 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
no boot startup-test
logging rate-limit console 10 except errors
!
!
resource-pool disable
!
!
voice-fastpath enable
ip subnet-zero
no ip routing
no ip finger
ip name-server 172.16.11.48
ip name-server 172.16.2.132
ip name-server 172.16.2.133
!
describes the significant output fields in the previous example.
show version Command Field Descriptions
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
Checking the Initial Running Configuration
Description
Watch for unscheduled reloads by inspecting this
field.
This line tells you why the gateway last reloaded.
If the field displays "power-on," a power
interruption caused the reload.
The gateway booted from this image location.
5