Cisco AS5350XM Configuration Manual page 75

Universal gateways software configuration guide
Hide thumbs Also See for AS5350XM:
Table of Contents

Advertisement

Basic Configuration Using the Command-Line Interface
Command
Step 7
AS5400(config-controller)# pri-group
[timeslots range]
Step 8
AS5400(config-controller)# Ctrl-Z
AS5400#
1.
For channelized T1 ISDN PRI—If you do not specify the timeslots, the specified controller is configured
for 23 B channels and 1 D channel. B channel numbers range 1 to 23; channel 24 is the D channel for
T1. Corresponding serial interface numbers range 0 to 23. In commands, the D channel is interface
serial slot/port:23—for example, interface serial 1/0:23.
For channelized E1 ISDN PRI—If you do not specify the timeslots, the specified controller is configured
for 30 B channels and 1 D channel. B channel numbers range 1 to 31; channel 16 is the D channel for
E1. Corresponding serial interface numbers range 0 to 30. In commands, the D channel is interface
serial slot/port:15—for example, interface serial 1/0:15.
Table 5
Area
none
Australia
Europe
Japan
North America
Verify
To verify that you have configured the interfaces correctly, use the following commands:
1
For T1, timeslots range 1 to 24. You can specify a range of timeslots (for example, pri-group timeslots 12-24) if other
timeslots are used for non-PRI channel groups.
ISDN Service Provider PRI Switch Types
Keyword
none
primary-ts014
primary-net5
primary-ntt
primary-4ess
primary-5ess
primary-dms100
primary-ni
Enter the show controller t3 command and specify the slot and port numbers. Verify that the
controller is up and that you do not have excessive errors; otherwise your controller might go down
frequently. This could indicate switch problems.
AS5400# show controller t3 1/0
T3 1/0 is up.
Applique type is Channelized T3
No alarms detected.
MDL transmission is disabled
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
Purpose
Configures ISDN PRI.
If you do not specify the timeslots, the controller
is configured for 23 B channels and 1 D channel.
Returns to enable mode.
Switch Type
No switch defined
Australia PRI switches
European, New Zealand, and Asia ISDN PRI
switches (covers the Euro-ISDN E-DSS1
signaling system and is European
Telecommunication Standards Institute or
ETSI-compliant)
Japanese ISDN PRI switches
AT&T 4ESS switch type for the United States
AT&T 5ESS switch type for the United States
NT DMS-100 switch type for the United States
National ISDN switch type
Configuring ISDN PRI
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As5400xm

Table of Contents