Cisco AS5350XM Configuration Manual page 57

Verifying Basic Setup
AS5400# show wedge output
Interface Name
Async4/00
Async4/01
Async4/02
Async4/03
GigabitEthernet0/0
GigabitEthernet0/1
Virtual-Access2
Virtual-Access3
AS5400#
Show the interface wedge process running again. (Process is running now.)
Step 9
AS5400# show proc cpu | i Intf
39
Wedge Interface Input Procedure
The following procedure shows an example of how to enable, disable, and show the results of wedged
interface input:
Show wedged interfaces. (Interfaces are already wedged.)
Step 1
AS5400# show wedged-interfaces input
Interface
Async4/00
Async4/01
Async4/02
Async4/03
GigabitEthernet0/0
GigabitEthernet0/1
Virtual-Access2
Virtual-Access3
AS5400#
AS5400#
Show the interface wedge process running.
Step 2
AS5400# show proc cpu | i Intf
39
AS5400#
AS5400#
AS5400#
Disable the interface monitor.
Step 3
AS5400# configure terminal
Enter configuration commands, one per line.
AS5400#(config)# no interface-monitor enable
AS5400#(config)# ^Z
AS5400#
AS5400#
AS5400#
Show the interface wedge process running again. (No process is running now.)
Step 4
AS5400# show proc cpu | i Intf
AS5400#
AS5400#
Time Since Wedge
00:25:26
00:25:20
00:25:15
00:25:08
00:26:29
00:26:44
00:40:12
00:40:12
0 25 0
Time Since Wedge
00:21:58
00:21:51
00:21:26
00:21:21
11:58:28
11:58:46
00:08:46
00:08:46
0 21 0
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
Using the Interface Queue Wedge Monitor
0.00% 0.00% 0.00% 0 Intf Wedge Monit
0.00% 0.00% 0.00% 0 Intf Wedge Monit
End with CNTL/Z.
13