Cisco Prisma II Installation And Operation Manual page 87

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

Modifying Reverse Receiver Alarm Limits,

Double-click the limit you want to change.

Result: The Change Value dialog box displays. The graphic below shows the

dialog box for the minor low limit of the Rx 1 Optical Input Power parameter.

In the Command to box, type the value to use for the limit.

Click Execute.

Result: The new value displays in the alarm limit column.

78-713378-01 Rev C

Continued

Operation Using LCI

4-29