Cisco Prisma II Installation And Operation Manual page 70

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

LCI Module Tree Overview,

Module Information

Information about a module (its parameters, alarms and statuses) is located in the

Module Details window. Within the module tree, you can access this window using

one of the following four methods:

• Double-click the chassis and select the module in the graphic that displays

• Right-click the chassis and select Open from the menu that displays

• Double-click the module

• Right-click the module and select Details from the menu that displays

Note: Although you can use the method that's most convenient for you, the

procedures throughout this chapter are described using the right-click module

technique.

For more information about each of these methods, refer to the next section,

Accessing the Module Details Window.

4-12

Continued

Operation Using LCI

78-713378-01 Rev C