Cisco Prisma II Installation And Operation Manual page 71

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

Accessing the Module Details Window

Introduction

Information about a module (its parameters, alarms and statuses) is located in the

Module Details window. The graphic below shows the Module Details window for

a Prisma II Reverse Data Receiver.

Within LCI's module tree, you can access this window using one of the following

four methods:

• Double-click the chassis and select the module in the graphic that displays

• Right-click the chassis and select Open from the menu that displays

• Double-click the module

• Right-click the module and select Details from the menu that displays

Note: Although you can use the method that's most convenient for you, the

procedures throughout this chapter are described using the right-click module

technique.

For more information about the module tree, refer to LCI Module Tree Overview

earlier in this chapter.

78-713378-01 Rev C

Operation Using LCI

4-13