Download Print this page

Cisco Prisma II Installation And Operation Manual page 62

Reverse video receiver and reverse data receiver
Hide thumbs Also See for Prisma II:

Advertisement

System Requirements
Introduction
You will need the following computer software and hardware to run LCI.
Laptop Computer Requirements
Pentium II
128 MB RAM
10 MB available hard drive space
1.44 MB floppy drive
CD-ROM Drive
Windows
Connecting the PC to the Prisma II Chassis
The required cable is a standard "off the shelf" DB9 Female to DB9 Male serial
extension cable. The connectors are a serial 9-pin D-shell (EIA 574/232).
The Cisco part number for a six-foot DB9 Female to DB9 Male extension cable is
180143.
4-4
300 MHz processor or equivalent
®
95 or later operating system software
®
Operation Using LCI
78-713378-01 Rev C

Advertisement

loading