Cisco Prisma II Installation And Operation Manual page 68

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

Starting LCI

Introduction

When LCI is started, it polls the module(s) located in the chassis your computer is

attached to. For each module it finds, LCI does the following:

• Represents the module in the module tree of the main LCI window

• Makes the polling information available so you can check and configure various

parameters

Important: Your computer must be connected to the chassis before you start LCI.

For instructions, refer to Connecting Your Laptop Computer to the Chassis earlier

in this chapter.

Starting LCI

To start the software, double-click the LCI icon on your Windows desktop.

Results:

• LCI polls the modules in the chassis

• The main LCI window displays

4-10

Operation Using LCI

78-713378-01 Rev C