Cisco Prisma II Installation And Operation Manual page 78

Checking the Operating Status
Introduction
Using LCI, you can check the status of all operating parameters of the Prisma II
Reverse Receiver.
Monitored Parameters
The table below describes the monitored parameters for this module.
Parameter
Rx 1 Optical Input
Power
Rx 2 Optical Input
Power
Module Temperature
4-20
Function
Displays optical input power
for Rx 1
Displays optical input power
for Rx 2
Displays module temperature
Operation Using LCI
Operating Range
-17.0 dBm to +2.0 dBm
-17 dBm to +2 dBm
-40°C and 65°C
78-713378-01 Rev C