Cisco Prisma II Installation And Operation Manual page 28

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

Connecting Optical Cables,

Cable Connection Procedure

Follow this procedure to make the optical cable connections for each module to be

installed.

Attach one end of the optical cable to the RX1 optical input connector

(connector 1), located on the front of the Prisma II Reverse Receiver.

Route the other end of the optical cable to the appropriate destination.

Repeat steps 1 and 2 for the RX2 optical input connector.

78-713378-01 Rev C

Continued

Installation

2-11