Cisco Prisma II Installation And Operation Manual page 58

Using the ICIM to Save the Configuration
Saving the Current Configuration
To save the current module configuration, follow these steps after every change.
1.
After you have changed a parameter or entered data, press the
save the changes and return to the MAIN menu.
2.
If you do not save your changes for two minutes, or if you press the
CAN
the MAIN menu.
Configuration Complete
Once you have configured the module using the ICIM to your system's
specifications, and no alarms are indicated, no further action is necessary. The
module operates without further input. Alarms, changes in operating parameters,
electrical power fluctuations, or changes in system design may be cause for
additional action.
3-26
keys at the same time, changes are aborted and the display returns to
Operation Using the ICIM
key to
ENTER
SHIFT
78-713378-01 Rev C