Cisco Prisma II Installation And Operation Manual page 11

Overview
Introduction
This chapter describes the front and back panels, and gives a setup summary for the
Prisma II™ Reverse Video Receiver and the Prisma II Reverse Data Receiver.
This guide covers the two following products.
Prisma II Reverse Data Receiver (data grade)
•
Prisma II Reverse Video Receiver (data/video grade)
•
Installation procedures and most operational procedures are identical for both
products.
Qualified Personnel
Only appropriately qualified and trained personnel should attempt to install this
product.
WARNING:
Allow only qualified personnel to install, operate, maintain, and service this
product. Otherwise, personal injury or equipment damage may occur.
In This Chapter
This chapter contains the following topics.
Introduction
The Front Panel
The Back Panel
Configuration Overview
78-713378-01 Rev C
Chapter 1
Introduction
Topic
Introduction
See Page
1-2
1-5
1-6
1-7
1-1