Cisco Prisma II Installation And Operation Manual page 15

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

The Front Panel

Overview

The Prisma II Reverse Receiver's front panel is designed with two optical connectors

for optical input and two test points for RF output verification. All are easily

accessible. ALARM and Power ON indicators on the front panel allow you to

monitor power and alarm status at a glance.

The features of the front panel of the two Prisma II Reverse Receivers are shown

below.

Alarm indicator

Power indicator

Optical input

-20 dB test points

Illustrations

The front panels of the two Prisma II Reverse Receivers are shown below.

78-713378-01 Rev C

Part

Illuminates or blinks when an alarm condition occurs

Illuminates when power is supplied to the module.

Connects the optical cable to the input of the reverse

receiver.

Provides a –20 dB sample of the RF output signal

Function

Introduction

1-5