Cisco Prisma II Installation And Operation Manual page 26

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

Connecting Optical Cables

The Fiber Fish Tool

The Fiber Fish tool that was shipped along with the Prisma II Chassis is used to pull

an optical cable from the rear of the chassis to the front of the chassis so the optical

cables can be connected to optical connectors on the front panel of Prisma II

modules.

The Fiber Fish Tool Hook

At the end of the Fiber Fish tool is a small hook that allows you to hold an optical

cable so that you can pull it through to the front panel of Prisma II Chassis.

78-713378-01 Rev C

Installation

2-9