Cisco Prisma II Installation And Operation Manual page 8

Reverse video receiver and reverse data receiver

Hide thumbs Also See for Prisma II:

Compliance

Laser and Electrical Safety

UL 1419:1997: A sample of this equipment has been tested and found to meet the

requirements of UL 1419:1997.

CSA C22.2 No. 1:1994: A sample of this equipment has been tested and found to

meet the requirements of CSA C22.2 No. 1:1994.

CFR 21:1996: A sample of this equipment has been tested and found to meet the

requirements of CFR 21:1996.

Electromagnetic Compatibility

FCC Part 15 Subpart B: This equipment has been tested and found to comply with

the limits for a Class A digital device according to Part 15 of FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

78-713378-01 Rev C

vii