Cisco Prisma II Installation And Operation Manual page 46

Monitoring Operating Status Using the ICIM
Monitored Parameters
The table below describes the monitored parameters for this module.
Parameter
InPwr1
InPwr2
ModTemp
Mute1
Mute2
Alarm 1
Alarm 2
Enable 1
Enable 2
Master 1
Master 2
NomPwr1
NomPwr2
Checking Operating Status
Using the ICIM, you can check the status of all operating parameters of this module.
To monitor the module operating parameters, follow these steps.
1.
From the MAIN menu, press the
2.
Press the
the
3.
Press the
4.
Press the
5.
Press the
displayed on the ICIM menu.
6.
When you have reached the desired module's location, press the
7.
Press the
parameters until you find the parameter of interest.
8. Check the status of the desired parameter or select other parameters to
monitor. When finished, press the
3-14
Function
Displays optical input power for Rx 1
Displays optical input power for Rx 2
Displays module temperature.
Mute status for Rx 1
Mute status for Rx 2
Alarm for Rx 1
Alarm for Rx 2
Rx 1 Enabled
Rx 2 Enabled
Rx 1 Master
Rx 2 Master
Nominal input power
Nominal input power
key to address the Shelf number. Then press the
SEL
key to scroll to the number of the desired shelf.

key. The Slot field is highlighted.
ENTER
key or the

key. The information for the module of interest is now
ENTER
key or the

Operation Using the ICIM
key to highlight Shelf and Slot fields.

key to scroll to the number of the desired slot.

key to scroll through the monitored

MAIN key to return to the MAIN menu.
Operating Range
-17.0 dBm to +2.0 dBm
-17.0 dBm to +2.0 dBm
-40°C and 65°C
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
-20.0 dbm to 0 dBm
-20.0 dbm to 0 dBm
key or

key.
STAT
Continued on next page
78-713378-01 Rev C