Features, Templates, Services, And User Setup Overview - Cisco 8831NR Administration Manual

Features, Templates, Services, and User Setup
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Features, Templates, Services, and User Setup Overview

After you install conferences stations in your network, configure network settings, and add each Cisco Unified
IP Conference Phone to Cisco Unified Communications Manager, you must use the Cisco Unified
Communications Manager Administration application to configure telephony features, optionally modify
conference phone templates, set up services, and assign users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified Communications
Manager documentation provides detailed instructions for these procedures.
For suggestions about how to provide users with information about features, and what information to provide,
see Internal Support Website, on page
For information about setting up conference phones in non-English environments, see
Support, on page
Features, Templates, Services, and User Setup Overview, on page 73
Available Telephony Features, on page 74
Corporate and Personal Directory Setup, on page 88
Button Templates, on page 89
Softkey Templates, on page 90
Recording Tone, on page 92
Enable Device Invoked Recording, on page 94
Enable Call History for Shared Line, on page 94
Services Setup, on page 95
Cisco Unified Communications Manager User Addition, on page 95
Call Waiting Setup, on page 96
Call Forward Notification Setup, on page 96
Calling Party Normalization, on page 97
Incoming Call Notification Window Timer Setup, on page 98
Linked Mode, on page 98
143.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
C H A P T E R
139.
8
International User
73