Cisco 8831NR Administration Manual page 118

Display Network Statistics Screen
Display Network Statistics Screen
To display the Network Statistics screen, perform these steps:
Procedure
Step 1 Press Applications.
Step 2
Select Settings.
Step 3 Select Status.
Step 4
Select Network Statistics.
Step 5 To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press Clear.
Call Statistics Screen
The Call Statistics screen displays information about the last call on the conference phone.
Note You can remotely view the call statistics information by using a web browser to access the Streaming Statistics
web page. For more information about remote monitoring, see
A single call can have multiple voice streams, but data is captured for only the last voice stream. A voice
stream is a packet stream between two endpoints. If one endpoint is put on hold, the voice stream stops even
though the call is still connected. When the call resumes, a new voice packet stream begins, and the new call
data overwrites the former call data.
Call Statistics Information
The following table describes the information displayed on the screen.
Table 33: Call Statistics Items
Item
Receiver Codec Type (Rcvr Codec)
Sender Codec Type
Receiver Size (Rcvr Size)
Sender Size
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
108
Model Information, Status, and Statistics
Remote Monitoring, on page
Description
Type of voice stream received (RTP streaming audio): G.729,
G.711 u-law, G.711 A-law, G.722, G.722.1, or Lin16k.
Type of voice stream transmitted (RTP streaming audio):
G.729, G.711 u-law, G.711 A-law, G.722, or Lin16k.
Number of bytes of voice packets received since voice stream
was opened.
Number of bytes of voice packets sent since voice stream was
opened.
111.