Recording Tone - Cisco 8831NR Administration Manual

Set Up Softkey Templates
Feature
Quality Reporting Tool
Redial
Remove Last Conference
Participant
Resume
Transfer
For more information, see Cisco Unified Communications Manager Administration Guide, "Softkey Template
Configuration" and the Cisco Unified Communications Manager System Guide, "Softkey Template".
Set Up Softkey Templates
Procedure
Step 1 Log on to Cisco Unified Communications Manager Administration.
Step 2 Select Device > Device Settings > Softkey Template.
Step 3
To assign a softkey template to a conference station, choose Device > Phone to select the conference station.
Step 4 In the Phone Configuration window, select a softkey template from the Softkey Template drop-down list.

Recording Tone

The Recording Tone feature indicates whether a recording tone is enabled or disabled for the phone. If this
feature is enabled, all parties on a call hear the tone being played, regardless of whether the call is recorded
or not. The tone first sounds when a call is answered.
Note Other related parameters — the recording tone frequency (in hz), the duration of the beep tone, and the beep
tone interval (how often the beep tone plays) — are defined on a per-Network Locale basis in the xml file
that defines tones. This xml file is named tones.xml or g3-tones.xml.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
92
Configurable Softkeys in Supported as a Softkey
the Softkey Template
Configuration
Quality Reporting Tool Yes
(QRT)
Redial (Redial) Yes
Remove Last Conference Yes
Participant (Remove)
Resume (Resume) Yes
Transfer Yes
Features, Templates, Services, and User Setup
Notes
Configure Quality
Reporting Tool as a
softkey.
Phone displays Redial
when Off Hook.
Phone displays Remove
when a participant is
selected.
—
Phone displays Transfer
when a call is connected.