Cisco 8831NR Administration Manual page 73

Cisco Unified IP Conference Phone Settings
Option
Admin. VLAN ID
Network (SW) Port Setup
Related Topics
Set Domain Name
Procedure
Step 1 Set the DHCP Enabled option to No.
Step 2
Choose Apps > Admin Settings > Network Configuration > Domain Name.
Step 3 Enter a new domain name.
Step 4
Press Validate, and then press Save.
Related Topics
Display the Configuration Menu, on page 60
Value Input and Editing Guidelines, on page 61
Set DHCP, on page 65
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
Description
Auxiliary VLAN in which the
phone is a member.
Used only if the phone does not
receive an auxiliary VLAN from
the switch; otherwise it is ignored.
Speed and duplex of the network
port. Valid values:
• Auto Negotiate
• 100 Half: 100-BaseT/half
duplex
• 100 Full: 100-BaseT/full
duplex
• 10 Half: 10-BaseT/half duplex
• 10 Full: 10-BaseT/full duplex
If the phone is connected to a
switch, configure the port on the
switch to the same speed/duplex as
the phone, or configure both to
auto-negotiate.
Set Domain Name
To Change
See Set Admin VLAN ID, on page
64.
63