Enable Call Features
Configure the LCD Contrast
You can configure the LCD contrast on the IP conference phone.
To configure the contrast for the IP phone screen on the phone:
Click Admin Login > advanced > User.
Step 1
Under LCD, in the LCD Contrast field, enter a number value from 1 to 30. The higher the number, the
Step 2
greater the contrast on the IP phone screen.
Click Submit All Changes.
Step 3
Configure Back Light Settings
To configure the back light settings for the IP phone screen on the phone:
Click Admin Login > advanced > Voice > User.
Step 1
Under LCD in the Back Light Timer field, enter the number of seconds of idle time that can elapse
Step 2
before the back light turns off.
Click Submit All Changes.
Step 3
Call Appearances Per Line
The IP conference phone is a single-line conference phone.
To expand the call appearances per line:
Click Admin Login > advanced > Voice > Phone.
Step 1
Step 2
In the Miscellaneous Line Key Settings section in the Call Appearance Per Line field, choose how
many calls per line to allow from the drop-down.
Enable Call Features
This section describes how to enable and disable call features on the IP conference phone.
Enable Call Transfer and Call Forwarding Services
You can transfer or forward a call when the service is enabled.
Click Admin Login > advanced > Voice > Phone.
Step 1
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
2-4
Chapter 2
Customize Standard Features