Led State Definitions - Cisco 8831NR Administration Manual

LED State Definitions

Table 2: Sound Base Buttons
1, 2, 3
4
LED State Definitions
LEDs on the Sound Base and DCU provide information about the state of the conference phone.
For example, green flashing lights on the Sound Base and on the DCU Call button indicate that there is an
incoming call. If the conference phone is on mute, then an incoming call will still flash green on the Call
button, but the LED for the DCU mute button is solid red, the sound base LEDs are solid red, and the mute
button on the Sound Base is also solid red.
The following table is a guide to the behaviour of the LEDs on the sound base and the DCU.
Table 3: Conference Phone LED State Table
Media Path
Status
Off
Off
Off
Off
Off
Off
Off
Off
Unmuted
Unmuted
Unmuted
Unmuted
Muted
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
12
Item
LED indicators
Mute button
Call on Focus
Base LEDs (3)
No call
No call, with VM
DND flash green
Incoming call green
Hold Revert Call green
Hold Call green
Hold Remote Call
Remote in use Call
Ringout/Connected Call green
DNDFlash green
Incoming Call green
Hold Revert Call green
Ringout/Connected red
Cisco Unified IP Conference Phone 8831 and 8831NR
Description
Three LED indicators provide call status information. For
details on LED behaviour, see
12.
Backlit mute button.
Sound Base
Mute Button
flash
flash
flash
pulse
solid
solid
solid
solid
solid red solid
LED State Definitions, on page
Display Control Unit (DCU)
DCU Call DCU Mute
Button Button
red solid
green flash
green flash
green flash
green pulse
red pulse
red solid
green solid
green flash
green flash
green flash
green solid red solid