Cisco 8831NR Administration Manual page 97

Features, Templates, Services, and User Setup
Feature
Shared Line
Special Sequence for Factory Reset
Time-of-Day Routing
Time Zone Update
TLS Enhancements
Transfer
Transfer - Direct Transfer
Description
Allows a user to have multiple phones that share
the same phone number or allows a user to share a
phone number with a coworker.
Allows the phone manufacturer to reset the factory
parameters.
Restricts access to specified telephony features by
time period.
Updates the Cisco Unified IP Phone with time zone
changes.
Added in Firmware Release 10.3(1)SR3.
Improved security with the parameter Disable
TLS1.0 and TLS1.1 for web access in Cisco
Unified Communications Manager. When set to
enabled, the phones support only TLS1.2 mode.
When set to disabled, TLS1.0, TLS1.1 and TLS1.2
are supported. This field applies to any phone or
group of phones that function as a HTTPs server.
Allows users to redirect connected calls from their
phones to another number.
Transfer: The first invocation of Transfer will
always initiate a new call by using the same
directory number, after putting the active call on
hold.
Direct Transfer: This transfer joins two established
calls (call is in hold or in connected state) into one
call and drops the feature initiator from the call.
Direct Transfer does not initiate a consultation call
and does not put the active call on hold.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
Available Telephony Features
Configuration Reference
For more information, see Cisco Unified
Communications Manager System Guide,
"Directory Numbers" chapter.
No configuration required.
For more information, see:
• Cisco Unified Communications
Manager Administration Guide, "Time
Period Setup"
• Cisco Unified Communications
Manager System Guide, "Time-of-Day
Routing"
For more information, see Cisco Unified
Communications Manager Administration
Guide, "Date and Time Group Setup"
chapter.
Some JTAPI/TAPI applications are not
compatible with the Join and Direct
Transfer feature implementation on the
conference phone and you may need to
configure the Join and Direct Transfer
Policy to disable join and direct transfer on
the same line or possibly across lines.
Some JTAPI/TAPI applications are not
compatible with the Join and Direct
Transfer feature implementation on the
conference phone and you may need to
configure the Join and Direct Transfer
Policy to disable join and direct transfer on
the same line or possibly across lines. For
more information, see the <xref Join and
Direct Transfer Policy>.
87