Cisco 8831NR Administration Manual page 114

Idle Display Setup
d) In the CM Services area, locate, stop, and start the Cisco TFTP service.
Idle Display Setup
You can specify an idle display that appears on the conference phone LCD screen. The idle display is an XML
service that the conference phone invokes when the conference phone has been idle (not in use) for a designated
period and no feature menu is open.
XML services that can be used as idle displays include company logos, product pictures, and stock quotes.
Configuring the idle display consists of these general steps:
1. Formatting an image for display on the conference phone.
2. Configuring Cisco Unified Communications Manager to display the image on the conference phone.
For detailed instructions about creating and displaying the idle display, see Creating Idle URL Using Graphics
on Cisco IP Phone at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml.
In addition, you can see the Cisco Unified Communications Manager Administration Guide or to Cisco Unified
Communications Manager Bulk Administration Guide for the following information:
• Specifying the URL of the idle display XML service:
• Specifying the length of time that the conference phone is not used before the idle display XML service
From a conference phone, you can see settings for the idle display XML service URL and the length of time
that the conference phone is not used before this service is invoked. To see these settings, choose Apps >
Settings > Device Configuration > HTTP Configuration, and then scroll to the Idle URL and the Idle URL
Time parameters.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
104
• For a single conference phone: Idle field on the Phone Template Configuration page in the Bulk
Administration Tool (BAT)
• For multiple conference phones simultaneously: URL Idle Time field on the Cisco Unified
Communications Manager Enterprise Parameters page, or the Idle field in the Bulk Administration
Tool (BAT)
is invoked:
• For a single conference phone: Idle Timer field on the Cisco Unified Communications Manager
Administration Phone Configuration page
• For multiple conference phones simultaneously: URL Idle Time field on the Cisco Unified
Communications Manager Administration Enterprise Parameters Configuration page, or the Idle
Timer field in the Bulk Administration Tool (BAT)
Cisco Unified IP Conference Phone Customization