Cisco 8831NR Administration Manual page 76

Set IP Address
Set IP Address
Procedure
Step 1 Set the DHCP Enabled option to No.
Step 2
Choose Apps > Admin Settings > Network Configuration > IP Address.
Step 3 Enter a new IP Address.
Step 4 Press Validate, and then press Save.
Set Subnet Mask
Procedure
Step 1 Set the DHCP Enabled option to No.
Step 2
Choose Apps > Admin Settings > Network Configuration > IP Subnet Mask.
Step 3 Enter a new IP address for the subnet mask.
Step 4
Press Validate, and then press Save.
Related Topics
Set Default Router
Procedure
Step 1 Unlock network configuration options.
Step 2
Set the DHCP Enable option to No.
Step 3 Choose Apps > Admin Settings > Network Configuration > Default Router1.
Step 4
Enter a new router IP address.
Step 5 Press Apply, and then press Save.
Related Topics
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
66
Set DHCP, on page 65
Set DHCP, on page 65
Cisco Unified IP Conference Phone Settings