Cisco 8831NR Administration Manual page 75

Cisco Unified IP Conference Phone Settings
Option
Default Router 1
DNS Server 1
Alternate TFTP
TFTP Server 1
TFTP Server 2
DHCP Address Released
Set DHCP
Procedure
Step 1
Unlock network configuration options.
Step 2 Choose Apps > Admin Settings > Network Configuration > DHCP Enabled.
Step 3
Set Enable to Yes. To disable DHCP, set Enable to No.
Step 4 Press Select, and then press Save.
Description
Default router used by the phone
(Default Router 1).
Primary Domain Name System
(DNS) server (DNS Server 1) and
optional backup DNS servers (DNS
Server 2–5) used by the phone.
Indicates whether the phone is
using an alternative TFTP server.
Primary Trivial File Transfer
Protocol (TFTP) server used by the
phone. If you are not using DHCP
in your network and you want to
change this server, you must use
the TFTP Server 1 option.
If you set the Alternate TFTP
option to yes, you must enter a
nonzero value for the TFTP Server
1 option.
Optional backup TFTP server that
the phone uses if the primary TFTP
server is unavailable.
Releases the IP address assigned
by DHCP.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
Set DHCP
To Change
Set Default Router, on page 66
Set DNS Server, on page 67
Set Alternate TFTP, on page 67
Set TFTP Server 1, on page 67
Set TFTP Server 2, on page 68
65