Cisco 8831NR Administration Manual page 71

Cisco Unified IP Conference Phone Settings
Password Protection
You can apply a password to the phone so that no changes can be made to the administrative options on the
conference phone unless the password is entered on the Admin Settings phone screen.
Apply Password
To apply a password to the conference phone, perform these steps:
Procedure
Step 1 In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile
Configuration window using Device > Device Settings > Common Phone Profile.
Step 2 In the Local Phone Unlock Password option, enter a password.
Step 3
Apply the password to the common phone profile used by the phone.
Value Input and Editing Guidelines
When you edit the value of an option setting, follow these guidelines:
• Use the keys on the keypad to enter numbers and letters.
• To enter letters by using the keypad, use the corresponding number key. Press the key one or more times
• To enter a period (for example, in an IP address), press * on the keypad.
• To enter a plus (+), for international dialling, press and hold the * key for at least 1 second.
• Press the up arrow on the navigation bar to move the cursor to the left most character, and press the down
• Press
• Press Cancel before pressing Save to discard any changes that you have made.
Note
The Cisco Unified IP Conference Phone provides several methods you can use to reset or restore option
settings, if necessary. For more information, see Reset or Restore.
Related Topics
to display a particular letter. For example, press 2 once for "a", twice quickly for "b", and three times
quickly for "c". After you pause, the cursor automatically advances to allow you to enter the next letter.
arrow on the navigation bar to move the cursor to the right most character.
if you make a mistake. This softkey deletes the character to the left of the cursor.
Display the Configuration Menu, on page 60
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
Password Protection
61