Cisco 8831NR Administration Manual page 68

Customize the Self Care Portal Display
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select User Management > End User.
Step 2 Search for the user.
Step 3
Click the user ID link.
Step 4 Ensure that the user has a password and PIN configured.
Step 5
In the Permission Information section, ensure that the Groups list includes Standard CCM End Users.
Step 6 Select Save.
Customize the Self Care Portal Display
Most options display on the Self Care Portal. However, you must set the following options by using Enterprise
Parameters Configuration settings in Cisco Unified Communications Manager Administration:
• Show Ring Settings
• Show Line Label Settings
Note The settings apply to all Self Care Portal pages at your site.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.
Step 2
In the Self Care Portal area, set the Self Care Portal Default Server field.
Step 3 Enable or disable the parameters that the users can access in the portal.
Step 4
Select Save.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
58
Self Care Portal Management