Cisco Unified Ip Conference Phone Installation Overview; Before You Begin - Cisco 8831NR Administration Manual

Cisco Unified IP Conference Phone Installation
•
•
•
•
•
•
•

Cisco Unified IP Conference Phone Installation Overview

This chapter helps you set up and install the Cisco Unified IP Conference Phone on an IP telephony network.
Note Before you install a conference phone, you must decide how to configure the conference phone in your
network. After you have determined your configuration requirements, you can install the conference phone
and verify its functionality. For more information, see
page 33

Before You Begin

Before you install the conference phone, review the requirements in the following sections.
Network Requirements
For the Cisco Unified IP Conference Station to successfully operate as an endpoint in your network, your
network must meet these requirements:
• VoIP network:
Cisco Unified IP Conference Phone Installation Overview, on page 43
Before You Begin, on page 43
Cisco Unified IP Conference Phone Components, on page 45
Cisco Unified IP Conference Phone Setup, on page 47
IP Phone Startup Verification, on page 53
Network Settings, on page 54
Cisco Unified IP Phone Security, on page 54
• VoIP configured on your Cisco routers and gateways
• Cisco Unified Communications Manager installed in your network and configured to handle call
processing
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
5
C H A P T E R
Cisco Unified IP Phones and Telephony Networks, on
43