Cisco 8831NR Administration Manual page 91

Features, Templates, Services, and User Setup
Feature
Do Not Disturb (DND)
EnergyWise
Enhanced Room Coverage
Fast Dial Service
Group Call Pickup
Description
When DND is turned on, either no audible rings
occur during the ringing-in state of a call, or no
audible or visual notifications of any type occur.
The following DND-related parameters are
configurable in Cisco Unified Communications
Manager Administration:
• Do Not Disturb: This check box allows you to
enable DND on a per-phone basis. Use Cisco
Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
• DND Incoming Call Alert: Choose the type of
alert to play, if any, on a phone for incoming
calls when DND is active. This parameter is
located on both the Common Phone Profile
page and the Phone configuration page (Phone
Configuration window value takes precedence).
Enables an IP Phone to sleep (power down) and
wake (power up) at predetermined times, to promote
energy savings.
Optional microphone extension kits provide
enhanced room coverage that can be further
expanded by linking two units together in Linked
Mode.
Allows a user to enter a Fast Dial code to place a
call. Fast Dial codes can be assigned to phone
numbers or Personal Address Book entries. (See
"Services" in this table.)
Allows a user to answer a call that is ringing on a
directory number in another group.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
Available Telephony Features
Configuration Reference
For more information, see Features and
Services Guide for Cisco Unified
Communications Manager, "Do Not
Disturb" chapter.
For more information, see EnergyWise on
the Cisco Unified IP Phone setup.
For more information see:
• Cisco Unified IP Conference Phone
8831 User Guide for Cisco Unified
Communication Manager,
"Conference Phone Link Mode"
chapter.
• Cisco Unified IP Conference Phone
8831 User Guide for Cisco Unified
Communication Manager, "Enhanced
Room Coverage" chapter.
For more information, see Modify phone
button template for PAB or Fast Dial.
For more information, see Features and
Services Guide for Cisco Unified
Communications Manager, "Call Pickup"
chapter.
81