Cisco 8831NR Administration Manual page 70

Display the Configuration Menu
Display the Configuration Menu
Note You can control whether a conference phone has access to the Settings menu, or to options on this menu, by
using the Settings Access field in the Cisco Unified Communications Manager Administration Phone
Configuration page. The Settings Access field accepts these values:
• Enabled: Allow access to the Settings menu.
• Disabled: Prevent access to the Settings menu.
• Restricted: Allow access to the User Preferences menu, but prevent access to other options on the Settings
If you cannot access an option on the Administrator Settings menu, check the Settings Access field. For more
information, see the Cisco Unified Communications Manager Administration Guide.
To display a configuration menu, perform these steps:
Procedure
Step 1
Press Apps.
Step 2 Select Admin Settings.
Note
Step 3
Enter the password and then press Enter. The Admin Settings password is configured in the Local Phone
Unlock Password parameter in the Common Phone Profile Configuration on Cisco Unified Communications
Manager Administration.
Note
Step 4
Perform one of these actions to display the desired menu:
• Use the navigation bar to select the desired menu and then press Select.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 5 To display a submenu, repeat Step 4.
Step 6
To exit a menu, press Exit.
Related Topics
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
60
menu.
For information about the Status menu, see
For information about the Reset Settings menu, see
Users can access the Admin Settings without entering a password when the Local Phone Unlock
Password parameter is not configured
Value Input and Editing Guidelines, on page 61
Security Setup Menu, on page 69
Network Setup Menu, on page 62
Cisco Unified IP Conference Phone Settings
Model Information, Status, and Statistics, on page
Troubleshooting and Maintenance, on page
105.
121.