Cisco 8831NR Administration Manual page 54

Cisco Unified Communications Manager Setup
• IP network:
Note The conference phone displays the data and time from Cisco Unified Communications Manager. If the Cisco
Unified Communications Manager server is located in a different time zone than the conference stations, the
conference stations do no display the correct local time.
Cisco Unified Communications Manager Setup
The conference phone requires Cisco Unified Communications Manager to handle call processing. See the
Cisco Unified Communications Manager Administration Guide or to context-sensitive help in the Cisco
Unified Communications Manager application to ensure that Cisco Unified Communications Manager is
correctly setup to manage the conference phone and to properly route and process calls.
If you plan to use autoregistration, verify that it is enabled and properly configured in Cisco Unified
Communications Manager before connecting any conference station to the network. For information about
enabling and configuring autoregistration, see Cisco Unified Communications Manager Administration Guide.
You must use Cisco Unified Communications Manager to configure and assign telephony features to the
conference phones.
In Cisco Unified Communications Manager, you can add users to the database, add users to user groups, and
associate users with specific conference phones. In this way, users gain access to Cisco Unified Communications
Self Care Portal that allow them to configure items such as call forwarding and voice messaging system
options.
Related Topics
Wireless Microphone Region Setting
The Wireless Microphone Frequency Lock feature provides a secure DECT frequency for wireless microphones
by locking down the Wireless Region setting. The Cisco Unified IP Conference Phone 8831 is shipped from
the manufacturer with the mask and the Wireless Region setting configured for your region.
The Cisco Unified IP Conference Phone 8831NR does not support wireless microphones.
For additional information, see Cisco Unified IP Conference Phone 8831 Release Notes for Firmware Release
10.3(1).
Safety
Review the following warnings before installing the conference station. To see translations of these warnings,
see the Regulatory Compliance and Safety Information for Cisco Unified IP Conference Stations document
that accompanied this device.
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
44
• Support for Dynamic Host Configuration Protocol (DHCP) or manual assignment of IP address,
gateway, and subnet mask
Cisco Unified Communications Manager IP Phone Addition
Available Telephony Features, on page 74
Cisco Unified IP Conference Phone Installation
Methods, on page 39