Cisco 8831NR Administration Manual page 41

Cisco Unified IP Conference Phone 8831 and 8831NR
• Power over Ethernet (PoE)
• External power supply
Determines how the conference phone receives power. For more information, see
on page
Step 2
Assemble the conference phone, adjust placement, and connect the network cable. Locates and installs the
phone in the network. For more information, see
Step 3
Monitor the conference phone startup process. Verifies that the conference phone is configured properly. For
more information, see
Step 4
Configure these network settings on the conference phone by choosing Apps > Settings > Network
Configuration.
Step 5
To enable DHCP:
a) Set DHCP Enabled to Yes.
b) To use an alternate TFTP server, set Alternate TFTP to Yes.
c) Enter an IP address for TFTP Server 1.
With DHCP enabled, the IP address is automatically assigned and the conference phone is directed to a TFTP
Server. Consult with the network administrator if you need to assign an alternative TFTP server instead of
using the TFTP server assigned by DHCP.
For more information, see
Step 6
To disable DHCP:
a) Set DHCP Enabled to No.
b) Enter a static IP address for the conference phone.
c) Enter the Subnet Mask.
d) Enter the IP address for Default Router 1.
e) Enter the Domain Name where the conference phone resides.
f) Set Alternate TFTP to Yes.
g) Enter an IP address for TFTP Server 1.
Without DHCP, you must configure the IP address, TFTP server, subnet mask, domain name, and default
router locally on the conference phone.
For more information, see
Step 7
Set up security on the conference phone. Provides protection against data tampering threats and identity theft
of conference phones. For more information, see
Step 8
Place calls with the conference phone. Verifies that the conference phone and features work correctly. For
more information, see the phone user guide.
Step 9
Provide information to end users about how to use their conference phones and how to configure their
conference phone options. Ensures that users have adequate information to successfully use their conference
phones. For more information, see
Terminology Differences
The following table highlights some of the important differences in terminology that is used in these documents:
35.
IP Phone Startup Verification, on page
Network Settings, on page 54
Network Settings, on page 54
Internal Support Website, on page
Cisco Unified IP Conference Phone 8831 and 8831NR Administration Guide
Phone Connections, on page
53.
and Network Setup Menu, on page
and Network Setup Menu, on page
Security Setup Menu, on page
139.
Terminology Differences
Conference Phone Power,
48.
62.
62.
69.
31