Honeywell MultiRAE Series User Manual page 95

Managing Man Down Parameters with Safety Suite Device Configurator (SSDC)
Connecting the instrument to a PC running Safety Suite Device Configurator (SSDC) allows you
to check and change Man Down settings through software.
Settings for Man Down are available in Safety Suite Device Configurator (SSDC) for:
Off/On
l
Man-Down Alarm Sensitivity (set to low, medium, high, or custom percentage)
l
Falldown Sensitivity (set to low, medium, or high to compensate for ambient vibration or
l
motion)
Warning After (countdown, in seconds, from pre-alarm to Man Down alarm)
l
Falldown Warning After (time after falling down is sensed, in seconds); Whenever the
l
acceleration speed is greater than the Falldown Sensitivity, the Man Down feature is
invoked.
Parameter Settings and Sequence Of Events
When a fall is sensed, as determined by the Motion Sensitivity and Falldown Sensitivity
settings, the Falldown Window starts. If motion resumes, then the instrument resets itself and
is ready for the next fall or motionless period.
Honeywell MultiRAE Series™ 90 User Manual