Table of Contents
Advertisement
1.
Start Safety Suite Device Configurator (SSDC)
2.
Start up the SSDC software and enter a username and password (the default
administrator username is "administrator" and the password is "Default123").
3.
Click on the device's serial number to view its information.
4.
Click "Settings" to view the current settings from the Wi-Fi equipped instrument.
5.
Scroll down to Wi-Fi Setting. Wi-Fi parameters appear in the next screen:
Changes in the setting can now be performed for the Wi-Fi equipped instrument. Click
save the new settings to the instrument.
Wi-Fi Power
Select either "On" or "Off" to set the default power setting for your Wi-Fi-equipped instrument.
Honeywell MultiRAE Series™
167
to
User Manual
Advertisement
Table of Contents
