Table of Contents
Advertisement
Note: Dotted line indicates automatic progression.
6.
If the Bump test is not aborted, the display shows the sensor names and tells you
whether the calibration passed or failed, followed by the sensor readings.
7.
If a sensor requires different gas (such as a PID for VOCs), you are prompted. Change
the calibration gas, and when you are ready, start bump testing by pressing [Y/+].
Note: You can quit the Bump Test procedure and exit to the menu whenever you see "Quit."
Press [MODE] to quit.
Honeywell MultiRAE Series™
77
User Manual
Advertisement
Table of Contents
