Honeywell MultiRAE Series User Manual page 175

Security Key
Depending on the type of security you choose, your key will have to be a different number of
characters. Here are characteristics of the different types, their relative security strength, and
the number of characters needed in the key:
Security Type
WEP (Wired Equivalent
Protocol)
WPA Personal
Wi-Fi Protected Access
Personal
WPA2 Personal
Wi-Fi Protected Access 2
Personal
WPA2/WPA Mixed Mode
Warning! Using a network with security disabled is not recommended.
SSID
The SSID (Service Set Identifier) is a case-sensitive unique identifier attached to the header of
packets sent over a wireless local-area network. Each wireless network in your range will have
its own SSID. Consult with your IT department for the SSID.
Server IP
Input the IP address of your system's server that the MultiRAE is connecting to if you know it.
Check with your IT department for guidance on setting IP addresses for your system within a
network.
Server Port
Set the appropriate port to match your system (for example, 9723). Check with your IT
department for guidance on server port settings.
Honeywell MultiRAE Series™
Security
Number of Characters
Rank
40/64-bit (10
characters)
Basic
128-bit (26
characters)
Strong 8 to 63 characters
Strongest 8 to 63 characters
WPA2:
Strongest 8 to 63 characters
WPA: Strong
170 User Manual