Honeywell MultiRAE Series User Manual page 162

Pump starts and
stops
intermittently.
MultiRAE
displays "Battery
Fully
Discharged".
Sensor is no
longer displayed
on LCD screen.
Error 4004
Instrument is in
alarm even
though there is
no gas
If you need replacement parts, a list is available online: www.sps.honeywell.com
Honeywell MultiRAE Series™
PCB.
Instrument has a Gamma
Sensor and old firmware.
Battery is completely
depleted.
Sensor failed calibration
multiple times.
PCB Failure
Unit has a "Latched" alarm
feature.
Center to replace PCB.
Instrument has Gamma sensor mode which
stops sensor reading. Unit requires new
PCB and new Gamma sensor. Send to RMA
Group to upgrade.
Battery needs to be charged.
Replace sensor.
Contact RMA Group or Authorized Service
Center to replace PCB.
Press the Y/+ key to clear alarm.
157 User Manual