Table of Contents
Advertisement
Press [Y/+] to save the change.
l
Press [N/-] to undo the change.
l
Channel
The MultiRAE and any other devices that you want to interconnect wirelessly must be operating
on the same channel.
1.
Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2.
After moving to the last digit and making changes, press [MODE].
Press [Y/+] to save the change.
l
Press [N/-] to undo the change.
l
Note: You cannot change the channel setting on an instrument equipped with a radio modem
that operates at a frequency of 868 MHz.
Honeywell MultiRAE Series™
103
User Manual
Advertisement
Table of Contents
