Redial A Number; Answer A Call; Place A Call, Basic; Place A Call Using The Handset - Cisco 3911 User Manual

2
Operating Your Phone
This section describes how to operate your Cisco Unified IP phone. Because of differences in phone and site configuration, not
all features and procedures described here might apply to your phone. Consult your system administrator for more information.
Note In the following procedures, you might require to enter information using the keypad. Press the backspace (<<) soft key
to erase digits that you enter incorrectly.

Place a Call, Basic

1. Select a phone line
2. Press or
. .
1 2
3. Dial the number.

Place a Call Using the Handset

1. Pick up the handset or press

Dial on-hook (with dial tone)

1. Press or , then dial the number.
.
1 2
2. Use the speakerphone (if already activated) or pick up the handset.

Redial a Number

Press .

Place a Call When Another Call is Active

Press and dial the number. The other call is placed on hold.

Dial From a Call Log

1. Do one of the following:
• Press the Navigation button and choose Missed Calls, Received Calls, or Placed Calls.
• Press and choose Directories > Missed Calls, Received Calls, or Placed Calls.
2. Select a number, then select Dial.

Answer a Call

You can answer a call by simply selecting the line with the incoming call and lifting the handset

Answer a Call, Speakerphone

1. Press the line button, if not already selected.
2. Press .
End a Call
To end a call:
, then dial the number.
5