Table 5 - Advanced Configuration Parameters - Honeywell SLG 700 User Manual

Table 5 - Advanced Configuration parameters, cont'd
Key: Plain = Read only Bold = Configurable
Transmitter Model
(Read only)
Process Connection Type
(Read only)
Sensor Connection
(Read only)
Mounting Location
Nozzle
Bypass/standpipe
Stillwell
Mounting Angle
Full Tank Detection
Use Field background
Dynamic background
Start Capture
Key: Plain = Read only Bold = Configurable
Config. Probe
Probe Type
Probe End Type
Centering Disk Material
Page 22

Table 5 - Advanced Configuration parameters

Bold underline = Method
Mounting
SLG720: Standard
SLG726: High Temperature & High Pressure
Threaded
Flanged
Direct
Remote
Tank
Bracket
Nozzle Height
Nozzle Diameter
Bypass/Standpipe Height
Bypass/Standpipe Diameter
Stillwell Height
Stillwell Diameter
In Degrees
Disabled
Enabled
Disabled
Enabled
OFF
ON
This will initiate capture of a new background echo
Bold underline = Method
Probe
Custom
Rod
Wire
Coax
Multi Twist Wire
None
Clamp
Weight
Loop
Custom
316/316L Stainless Steel
PTFE
C-276 Nickel Alloy
SLG 700 Series HART Option User's Manual
Bold italic = Table or graph
Enabled: Detection of product at top of
flange.
Enabled: Use captured field background for
noise cancellation.
This feature provides enhanced immunity
against changes in measurement conditions
by dynamically adjusting the active Field or
Obstacle background profile. This feature is
not applicable for the Factory background.
When enabled, the sensor periodically
schedules automatic updates to the
background echo profile."
Bold italic = Table or graph
Revision 5