Honeywell SLG 700 User Manual page 43

Non-Critical
Help- Non Crit.
Diagnostics
Non-Critical
Help- Non Crit.
Diagnostics
Non-Critical
Help- Non Crit.
Diagnostics
Extd dev status
Help- Extended Device
Status
Additional status
DAC Failure
Communication
Display & Sensor
Other Info
Sensor
Sensor
Database integrity
Database integrity
RAM Integrity
RAM Integrity
Display Integrity
Reset Database
Revision 5
Displays the second set of possible Non-Critical Status
faults and indicates OFF for inactive faults or ON for active
faults.
Provides a more detailed description of each of the second
set of Non-Critical Status faults.
Displays the third set of possible Non-Critical Status faults
and indicates OFF for inactive faults or ON for active
faults.
Provides a more detailed description of each of the third
set of Non-Critical Status faults.
Displays the fourth set of possible Non-Critical Status
faults and indicates OFF for inactive faults or ON for active
faults.
Provides a more detailed description of each of the fourth
set of Non-Critical Status faults.
Displays all possible Extended Device Status faults and
indicates OFF for inactive faults or ON for active faults.
Provides a more detailed description of each Extended
Device Status fault.
Displays additional status of these components.
Provides recovering from NVRAM corruption. When this is
activated sensor/COMM will reset NVRAM corrupted alarm
and default the database. Resetting of COMM/Sensor
NVRAM alarms should be done separately - specific user
interface and separate bits in HART command that specify
which alarm should be reset. When resetting COMM alarm,
a warning "transmitter configuration will be defaulted"
should be displayed. For sensor alarm reset, warning
should be "calibration and characterization data will be
defaulted".
SLG 700 Series HART Option User's Manual
Page 35