Honeywell SLG 700 User Manual page 86


Long Tag: Allows the entry of a longer tag with a maximum of 32 characters from the
(ISO Latin 1 character set).

Default Units: This sub-menu item allows selection of the units to be used for the
four physical properties applicable to the transmitter. All configuration parameters or
process output variables for a given property will be displayed in the selected units.
The available options are:

Distance: mm, cm, m, in, ft

Temperature: °C, °F

Velocity: m/s, m/h, in/s, in/min, ft/s, ft/min

Volume: l, m³, in³, ft³, yd³, US gal, US bbl (liq), US bbl (oil), imp gal
Note: For the HART DTM interface shown below, selection of the Metric, U.S. or Imperial
measurement systems is only used to pre-select a set of values. Individual units
can be selected from different measurement systems if this is desirable.
Page 78
SLG 700 Series HART Option User's Manual
Revision 5