Table 9 - Pv Tracking Diagnostics - Honeywell SLG 700 User Manual

PV Low Method
Value
PV High Method
Value
Low Alarm Parameter
Limit
Low Alarm Parameter
Counter
High Alarm Parameter
Limit
High Alarm Parameter
Counter
Change Method
Alarm Limits
Reset PV Parameter
Tracking
Page 52

Table 9 - PV Tracking Diagnostics

Description Minimum PV that the device has experienced since power-
up, in user selected units.
Set-up None. Value initialized to Min PV Limit value prior to
leaving the factory. Updates to current PV automatically
when powered at user site after valid initial measurement.
Description Maximum PV that the device has experienced since power-
up, in user selected units.
Set-up None. Value initialized to Min PV Limit value prior to
leaving the factory. Updates to current PV automatically
when powered at user site after valid initial measurement.
Description PV specified lower operating limit in user-selected units
Set-up None
Description Number of times PV Low Alarm Limit has occurred.
Set-up None
Description PV specified upper operating limit in user selected units.
Set-up None
Description Number of times PV High Alarm Limit has occurred.
Set-up None
Description Changes alarm limits.
Set-up None
Description Resets alarm counters to 0. Sets PV Low and High limit
values to current measured PV value.
Set-up None
SLG 700 Series HART Option User's Manual
Revision 5