Honeywell SLG 700 User Manual page 88

Measured Products:
This configuration parameter allows the number of products in the tank to be identified. The
available options are:
Single Liquid: In this application the SLG 700 measures the level of one liquid product in the
tank with a vapor, which is usually air, above the product. This application is shown in
Two Liquids Flooded: In this application there are two liquid products in the tank; one
supported on top of the other, as shown below in
tank is always full with the Upper Product occupying the entire upper portion of the tank
so that there is no vapor above the Upper Product. The SLG 700 measures the level of
the interface (boundary) between the two liquid products in the tank.
Page 80
Figure 7: Single Liquid Application
Figure 8: Two Liquids Flooded Application
SLG 700 Series HART Option User's Manual
Figure 8. As the name indicates, the
Figure 7.
Revision 5