Table 7 - Tamper Reporting Logic Implementation With Write Protect - Honeywell SLG 700 User Manual

Operating Voltage
Loop Voltage
Min Loop Voltage
MSP 430 VCC
Voltage Tracking
Reset Volt. Tracking
MCU Supply Voltage
Power Cycles
Last Power Cycle
Config History
First History Parameter
Second History Parameter
Third History Parameter
Fourth History Parameter
Fifth History Parameter
Exit
Error Log
Error Log Flag
Show Error Log
Reset Error Log

Table 7 - Tamper Reporting Logic Implementation with Write Protect

Write Protect
Write Protect
Jumper Status
ON ON or OFF
OFF ON
(or missing)
OFF OFF
(or missing)
Note that Tamper Reporting is independent of Write Protect status.
Revision 5
Adv Diagnostics, cont'd
Configuration
Software Change
Status Allowed?
NO
NO
YES
SLG 700 Series HART Option User's Manual
See
Table 12 - Operating Voltage Diagnostics
Displays a history of the last five
configuration parameters that have been
changed. See Table 13 - Configuration
Change History Diagnostics
Enable and disable error logging.
If error log is enabled all critical errors
triggered will be logged with a time stamp
(elapsed time since power up). See Table 14
- Error Log Diagnostics
Tamper
Reporting Status
ON YES
OFF NO
Tamper Alerted
Posted?
Page 41