Table of Contents
Advertisement
Hazard Warning System
This system should be used only
when your car is stopped under
emergency or hazardous conditions.
To activate, push the hazard warning
switch (
). The front and rear turn
signals will blink simultaneously and
both indicator lights will flash.
Push the switch (
the system off.
CAUTION: Be sure to push the switch all the way off when the
hazard warning is no longer required, or the turn signals will not
work properly.
Panel Brightness Control
The intensity of the instrument
lights can be adjusted when the light
switch is in either of the two "ON"
positions. Push the button so it pops
out, then turn the panel brightness
control knob.
Ignition Switch Light
This light illuminates the switch
when the driver's door is opened and
remains on for several seconds after
the driver's door is closed.
) again to turn
Push
Advertisement
Table of Contents
