Software Support - Cisco 10000 Series Configuration Manual

8-Port Unchannelized E3/T3 Line Card
Configuration
This chapter describes procedures for configuring the Cisco 10000 series 8-Port Unchannelized E3/T3
line card, hereafter known as the 8-Port Unchannelized E3/T3 line card.
The 8-Port Unchannelized E3/T3 line card provides Cisco 10000 series routers with eight E3 or T3
high-density unchannelized interface ports.
This chapter contains the following sections:
•
•
•
•
•

Software Support

Table 15-1
Unchannelized E3/T3 line card.
Table 15-1
Required PRE
PRE1
PRE2
OL-8834-04
Software Support, page 15-1
Default Values, page 15-2
Configuration Task Overview, page 15-4
Controller Configuration Commands, page 15-6
Interface Configuration Commands, page 15-8
shows the minimum Cisco IOS release on each release train that supports the 8-Port
8-Port Unchannelized E3/T3 Line Card Software Support
Minimum Cisco IOS Releases
Cisco IOS Release 12.0(22)S and later releases of Cisco IOS 12.0S
Cisco IOS Release 12.0(22)S and later releases of Cisco IOS 12.0S
Cisco IOS Release 12.0(20)ST and later releases of Cisco IOS Release 12.0ST
Cisco IOS Release 12.3(7)XI and later releases of Cisco IOS 12.3XI
Cisco IOS Release 12.2(28)SB and later releases of Cisco IOS 12.2SB
C H A P T E R
Cisco 10000 Series Router Line Card Configuaration Guide
15
15-1