Software Support - Cisco 10000 Series Configuration Manual

6-Port Channelized T3 Line Card Configuration
This chapter describes procedures for configuring the Cisco 10000 series 6-Port Channelized T3 line
card, hereafter known as the 6-Port Channelized T3 line card.
The 6-Port Channelized T3 line card provides the Cisco 10000 series routers with six DS3 ports of
high-density T3 service.
This chapter contains the following sections:
•
•
•
•
•
•
•
•

Software Support

Table 8-1
Channelized T3 line card.
Table 8-1
Required PRE
PRE1
PRE2
OL-8834-04
Software Support, page 8-1
Default Values, page 8-2
Interface Syntax, page 8-3
Interface Configuration Sample, page 8-3
Unchannelized T3 Commands, page 8-5
Channelized T3 Commands, page 8-9
Channel-Group Command for DS0 Timeslots and T1s, page 8-14
Channelized T1 Commands, page 8-15
shows the minimum Cisco IOS release on each release train that supports the 6-Port
6-Port Channelized T3 Line Card Software Support
Minimum Cisco IOS Releases
Cisco IOS Release 12.0(9)SL and later releases of Cisco IOS 12.0SL
Cisco IOS Release 12.0(17)ST and later releases of Cisco IOS 12.0ST
Cisco IOS Release 12.0(22)S and later releases of Cisco IOS 12.0S
Cisco IOS Release 12.2(8)BZ and later releases of Cisco IOS 12.2BZ
Cisco IOS Release 12.2(15)BX and later releases of Cisco IOS 12.2BX
Cisco IOS Release 12.3(7)XI and later releases of Cisco IOS 12. XI
Cisco IOS Release 12.2(28)SB and later releases of Cisco IOS 12.2SB
C H A P T E R
Cisco 10000 Series Router Line Card Configuaration Guide
8
8-1