Cisco 10000 Series Configuration Manual page 306

Preprovisioning Line Card Slots
6cht3-1
6oc3pos-1
8e3ds3-1
8e3ds3atm-1
8fastethernet-1
mode
Defaults The default mode of operation for the 24-port E1/T1 line card is E1.
Command Modes Global configuration
Command History Release
Release 12.0(17)ST
Release 12.0(21)SX
Release 12.0(22)S
Release 12.0(23)S
Release 12.2(15)BX
Release 12.3XI
Release 12.2(28)SB
Usage Guidelines
You must specify a line card slot and subslot, and the line card for which you want to preprovision the
line card slot.
Cisco 10000 Series Router Line Card Configuaration Guide
16-4
Chapter 16
Preprovisions a line card slot for a 6-Port Channelized T3 line card.
Preprovisions a line card slot for a 6-Port OC-3/STM-1 Packet Over
SONET line card.
Preprovisions a line card slot for an 8-Port Unchannelized E3/T3 line card.
Preprovisions a line card slot for an 8-Port E3/DS3 ATM line card.
Preprovisions a line card slot for an8-Port Fast Ethernet Half-Height line
card.
Indicates the mode of operation of the line card. Available options are E1
and T1.
Modification
This command was introduced on the Cisco 10000 series router for the
following line cards:
• 1-Port Gigabit Ethernet line card
• 1-Port OC-12 Packet Over SONET line card
6-Port OC-3/STM-1 Packet Over SONET line card
•
6-Port Channelized T3 line card
•
1-Port Channelized OC-12/STM-4 line card
•
4-Port Channelized OC-3/STM-1 line card
•
8-Port Unchannelized E3/T3 line card
•
1-Port OC-12 ATM line card
•
This command was modified to support the 4-Port OC3/STM-1 line card
with intermediate-reach optics.
This command was modified to support the 24-port E1/T1 line card and the
8-Port Unchannelized E3/T3 line card.
This command was modified to support the 1-Port Gigabit Ethernet
Half-Height line card and the 8-Port Fast Ethernet Half-Height line card.
This command was modified to support the 1-Port OC-48/STM-16 Packet
Over SONET line card.
This command was integrated into Cisco IOS Release 12.3XI.
This command was modified to support the 4-Port Channelized T3
Half-Height line card.
Preparing for Line Card Installation and Configuration
OL-8834-04